Summary
Before commencing the installation of any Proxicam Pedestrian Detection System components, technicians must perform a comprehensive pre-installation inspection and adhere to strict electrical safety protocols. This guide outlines the mandatory safety guidelines and system checks required to ensure a safe, compliant, and successful hardware deployment on industrial machinery.
Key Safety Specifications & Constraints
- Installer Qualification:
Installation must be carried out strictly by an Authorised Proxicam Distributor, Reseller, Accredited Installer or Auto Electrician. - Serviceability:
System components are not individually serviceable; do not attempt to open or repair any components, as this will immediately void the warranty. - Operational Limitation:
The Proxicam system is an operator assistance aid only and does not replace operator attention or responsibility. As with all technology, it cannot guarantee 100% accuracy at all times. - Asset Transfer:
The product should not be removed or transferred between different assets other than by an authorized technician. - System Voltage:
[TBD: Missing Info - Specific machine minimum/maximum voltage tolerances before requiring external voltage regulation].
Pre-Installation & Safety Steps
- Verify Qualifications:
Confirm that you are a qualified and suitably competent technician authorized to install the Proxicam system. If you are unsure at any stage of the process, you must contact technical support. - Machine Power Down:
Ensure the machine is safely parked and completely powered down. Do not connect any of the system’s components while the machine’s power is On. - Component Inspection:
Inspect all Proxicam hardware (cameras, monitors, hubs, harnesses) for physical damage prior to installation. - Plan Hardware Placement:
Determine the mounting locations for all components. Ensure that cameras, monitors, and indicators will not be covered or obstructed during normal machine operation. - Plan Cable Routing:
Visually inspect the machine to map out the routing for the extension harnesses. [TBD: Missing Info - Exact clearance distances required from high-heat engine components and mechanical pinch points]. - Complete All Connections:
Securely connect all system components, ensuring screw-lock aviation connectors are tight and waterproof seals are seated correctly. All system components must be fully connected prior to turning the machine's power back On.
Troubleshooting & FAQ
Can our in-house mechanical team install or transfer the Proxicam system to a new forklift?
No. To ensure system integrity and maintain warranty coverage, installation, removal, or transfer of the system between assets must be carried out exclusively by an Authorised Proxicam Distributor, Reseller, or Accredited Installer.
One of the camera extension harnesses is too long. Can I cut and splice the cable to make it shorter? No. Proxicam system components are not individually serviceable. You must not attempt to open, repair, or modify any of the hardware or harnesses, as this will void the warranty. Neatly coil and secure any excess cable length using heavy-duty cable ties, or order a shorter factory extension harness.
Related Articles
- Hardware Installation: Proxicam AI Camera PXCAM-EVO
- Hardware Installation: Proxicam LCD Monitor (PXLCD) and Quick Setup
- Proxicam End User Terms Of Use